How To Fix A Running Toilet in 5 Steps

Looking to fix that annoying running toilet once and for all without breaking the bank? Well, if you’re up for a little challenge (depending on how handy you are), we’ve decided to give you the breakdown in 5 simple steps to get that running toilet to stop once and for all.

Not only is the running toilet annoying to listen to but it’s also wasting an enormous amount of water which can then lead to a very high water bill. It’s easily avoidable and honestly, it’s just one extra expense that we just don’t need living in an expensive city like Vancouver!

So before you pick up your phone and reach out to a professional plumber, here are 5 simple steps that you can try to fix the issue yourself!

Step 1: Do Some Investigating Work

Carefully take the lid off of your toilet tank and check out the mechanics of your toilet, It’s amazing how we all use this fixture everyday and most of us don’t even know how it works! Try and familiarize yourself with your toilet and understand how it works. Do some investigating work and try and locate where you’re hearing the dripping water coming from.

Step 2: Turn Off Water Supply

Locate the shut off valve behind your toilet and turn the valve clockwise to stop the water flowing to the toilet. This will prevent any water wastage in the meantime as well as during the repair process.

Step 3: Check The Flapper

Inspect the flapper within the toilet tank. The flapper is a flat rubber piece that seals the water within the tank at the bottom. The flapper allows the water to exit the tank when you flush the toilet. If the flapper is worn out or misaligned, it could be causing the water to be slowly trickling down the drain creating that constant trickle of water. Adjust the flapper or replace the flapper if necessary.

Step 4: Adjust The Float

The toilet float regulates the water level within the tank. If the float is too high, it may be causing the water to overflow into the overflow tube leading to a running toilet. Adjust the float to the correct position to prevent this issue from occurring.

Step 5: Test The Toilet

Turn the water supply valve back on and let the tank fill back up with water. Flush the toilet and observe the mechanisms within the tank at work to see if the issue has been resolved. If the toilet water keeps running, consider seeking professional assistance from a trusted Vancouver plumber.. like us!

Let’s Fix Your Running Toilet with Miller Plumbing & Drainage Today

Tried the steps but still facing issues? Let the experts at Miller Plumbing & Drainage help! Call us today for fast, reliable plumbing service in Vancouver. Don’t let a leaky toilet raise your water bill—get it fixed right the first time!